32-ch 1.5U 16 PoE 4K NVR DS-7732NI-I4/16P(B)(STD)/AU/PLUG/3TB
Up to 32 channel IP cameras can be connected
- Up to 2-ch @ 12 MP/16-ch @ 1080p decoding capacity
- Only (B) version support 2 HDMI and 1 VGA interfaces, and HDMI interfaces support independent video output
- 4 HDDs for continuous video recording
- Plug & Play with 16 Power-over-Ethernet (PoE) interfaces
- Supports various special function cameras, including thermal camera/fisheye/people counting/heatmap/ANPR (automatic number plate recognition)
- Advanced streaming technology enables smooth live view and data self-correction in poor network conditions
- Supports dual-stream recording to save time and bandwidth.
Product Info
- Video And Audio
- IP Video Input
32-ch
Up to 12 MP resolution
- Outgoing Bandwidth256 Mbps
- VGA Output1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
- CVBS Output1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480
- HDMI 1 Output4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
- HDMI 2 Output1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
- Video Output ModeHDMI1/VGA simultaneous output, HDMI2/VGA independent output
- Incoming Bandwidth256 Mbps
- Audio Output1-ch, RCA (Linear, 1 KΩ)
- Two-Way Audio1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
- Decoding
- Dual-Stream RecordingSupport
- Stream TypeVideo, Video & Audio
- Audio CompressionG.711ulaw/G.711alaw/G.722/G.726
- Decoding FormatH.265+/H.265/H.264+/H.264/MPEG4
- Decoding Capability2-ch@12 MP (20 fps)/4-ch@8 MP (25 fps)/8-ch@4 MP (30 fps)/16-ch@1080p (30 fps)
- Synchronous Playback16-ch
- Recording Resolution12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF
- Network
- Network ProtocolTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
- Remote Connection128
- Network Interface1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
- PoE
- Interface16, RJ-45 10/100 Mbps self-adaptive Ethernet interface
- Power≤ 200 W
- StandardIEEE 802.3 af/at
- Auxiliary Interface
- ESATA1 eSATA interface (optional)
- SATA4 SATA interfaces
- CapacityUp to 10 TB capacity for each disk
- Serial Interface1 RS-485 (half-duplex), 1 RS-232
- USB InterfaceFront panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0
- Alarm In/Out16/4 (16/8 optional)
- General
- Power Supply100 to 240 VAC, 50 to 60 Hz
- Consumption≤20 W (without HDD and PoE off)
- Working Temperature-10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity10% to 90%
- Chassis19-inch rack-mounted 1.5U chassis
- Dimension (W × D × H)440 × 387 × 75 mm ( 17.3"× 15.2" × 3.0")
- ≤ 5 kg (11 lb) (without HDD)
- Certification
- FCCPart 15 Subpart B, ANSI C63.4-2014
- CEEN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Return & Refund Policy
-
We undertake to reimburse you for any product delivered to you that is faulty or is in a damaged condition. If you wish to return a faulty or damaged product, you must notify us through our designated “contact us” webpage where we set out our requirements relating to return of such goods.
-
We also undertake to exchange any undamaged product purchased from us so long as it is returned unused and with proof of purchase within 30 days of purchase however we will not provide any refund of such purchase. If undamaged goods are returned to us for exchange, we do not refund any packing and postage charges. Return of undamaged goods for exchange is entirely at your cost and risk.
-
There is a $55 restocking fee applicable on all returns unless it is deemed faulty.
-
If you a returning a product which is faulty, please keep your receipts and we can reimburse you for the shipping back if indeed it has been determined to be faulty. If not faulty, you will not be eligible for refund of the freight.
-
If we are unable at the time of return to replace or exchange returned goods, we undertake to reimburse your credit card for the amount initially debited for the purchase EXCLUDING packaging and postage charges / handling fees – (usually $55 from each order).
-
If you try and upgrade the firmware with an incompatible region firmware and require us to reflash it, cost is 180 inc GST. Note – we will try to do this only. We cannot guarantee this can be done.
-
It is important to note that we sell Commercial grade products. Commercial grade products usually do not come with easy to follow instructions. Technicians which install these products usually go through a training program to help them get accustomed to configuring the product. Thus by purchasing from us, you acknowledege that you will find a technician or ask an expert to install/configure the product for you. You are welcome to try to configure the items yourself, a lot of people with strong technical background manage to do it, however note that this could be time consuming. Also note we do not provide phone support.
-
Shipping Info
PROCESSING TIMES
Orders are processed Monday through Friday and are shipped within 24 hours of placement, excluding weekends and public holidays. Tracking information is sent via email at 11pm on the day that orders are shipped out.
Delivery time
If you have not received your items within 4 business days of making your order please email us with your full name and order number and we will look into your delivery immediately. In most cases this means that an attempted delivery has occurred and that your parcel is waiting for you at your nearest post office for collection. Please check your spam box for any notification emails from us.
Tracking your order
Once your order is packed and leaves our warehouse you will receive an email with a tracking number to track your parcel with Startrack.com.au or CouriersPlease.com.au or Toll Priority
If you are not home at the time of delivery, for your convenience, your parcel will be left in a secure place if deemed safe to do so by the delivery driver. If they feel it is not safe to leave, or the parcel is too large, you will be left a card and your parcel will be taken to your local depot.